- Model NO.: 35000L
- Name: Shell and Tube Steam Heat Exchanger
- Dimension: 2500mm
- Weight: 70tons
- Product Type: Heat Exchanger
- Tubesheet Material: Stainless Steel
- Trademark: Suntech
- Origin: Nanjing
- Application: Heater
- Volume: 35000L
- Length: 8000mm
- Usage: Liquid Industry
- Surface: 300 Sqm
- Brand: Suntech
- Specification: ASME U Stamp, PED, TEMA, API650, EN13445
- HS Code: 841861900
Item Name:Heat exchanger
Dimension: OD2500*Length 8000mm*S300 sqm
Weight: 20 tons
Surface condensers are also used in applications and industries other than the condensing of steam turbine
exhaust in power plants.In thermal power plants, the primary purpose of a surface condenser is to condense
the exhaust steam from a steam turbine to obtain maximum efficiency and also to convert the turbine exhaust
steam into pure water (referred to as steam condensate) so that it may be reused in the steam generator or
boiler as boiler feed water.The steam turbine itself is a device to convert the heat in steam to mechanical power.
The difference between the heat of steam per unit mass at the inlet to the turbine and the heat of steam per
unit mass at the outlet to the turbine represents the heat which is converted to mechanical power. Therefore,
the more the conversion of heat per pound or kilogram of steam to mechanical power in the turbine, the better
is its efficiency. By condensing the exhaust steam of a turbine at a pressure below atmospheric pressure,
the steam pressure drop between the inlet and exhaust of the turbine is increased, which increases the amount
of heat available for conversion to mechanical power. Most of the heat liberated due to condensation of the exhaust steam
is carried away by the cooling medium (water or air)
used by the surface condenser
- Power and Cogeneration Plants
- Waste to Energy and Biomass Plants
- Mechanical drive in Chemical & Petrochemical plants.
- District Heaters
- Desalination plants
- Shipbuilding Industry
Standard specification for our popular products:
2.Manufacturing Facilities (Partial)
3. Testing Device (Partial)
We provides high grade pressure vessel, reactors, heat exchangers, heaters, towers, tanks, columns, condensers, reboilers, separators, evaporators made of Nickel Alloy, Titanium Alloy, Copper-Nickel Alloy, Zirconium, Tantalum Alloy, Super Stainless Steel and clad metals, designed and fabricated according to ASME U, PED, TEMA, API650, EN13445 and other codes. These products have been widely used in such fields as petro-chemical, chemical, salt manufacturing, pharmacy, metallurgy, power, electronics, sea-engineering and environment protection, by Global Top 50 Chemicals for one decade.
We have around 40 welders qualified for 252 types of welding, including SAW, STAW, GTAW, GMAW) and 9 persons for non-destructive inspection (including PT,UT,MT,PT), and 5 NDE persons are qualified with the requirements of ASME.
R & D Dep. is capable of designing drawings with CAD according to GB and ASME standards. It has such technique specifications and standards related to designing, including ASME, TEMA, API650 and etc.
Our manufacturing area for pressure vessel is 14000m2(1st phase) and 15000 m2(2nd phase), among which, there are more than 1000M2 isolated workshop on non-ferrous metal welding. Rolling capacity is 80mm maximum and crane capability is 100 tons maximum.